[1]畢宗岳,張錦剛.連續管焊絲的試驗研究[J].焊管,2008,31(1):26-28.[doi:1001-3938(2008)01-0026-03]
 BI Zong-yue,ZHANG Jin-gang.Testing & Research of Welding Wire Used for Coil Tubing[J].,2008,31(1):26-28.[doi:1001-3938(2008)01-0026-03]
點擊復制

連續管焊絲的試驗研究
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
31
期數:
2008年第1期
頁碼:
26-28
欄目:
試驗與研究
出版日期:
2008-01-28

文章信息/Info

Title:
Testing & Research of Welding Wire Used for Coil Tubing
文章編號:
1001-3938(2008)01-0026-03
作者:
畢宗岳12張錦剛2
(1.西安石油大學;2.寶雞石油鋼管有限責任公司)
Author(s):
BI Zong-yueZHANG Jin-gang
關鍵詞:
連續管高強度低合金鋼(HSLA)焊絲焊接抗腐蝕性
Keywords:
coil tubinghigh strength low-alloy steel(HSLA)welding wireweldanti-corrosion
分類號:
TG422.3
DOI:
1001-3938(2008)01-0026-03
文獻標志碼:
A
摘要:
連續管是一種用于油氣田修井、測井、鉆井等方面的專用管材。通過對其材料和焊接接頭的分析研究,結合其焊接工藝和使用性能要求,提出連續管焊接用焊絲的成分范圍。通過實驗室試驗,試制出了滿足性能要求的連續管焊絲。
Abstract:
Coil tubing is a kind of special tubular used for workover operation,well-logging and drilling in oil-gas field,through analyses and research of raw material and welding joint,this article proposes composition range of welding wire used for coil tubing in combining with welding process and usage property,and welding wire used for coil tubing which meet property requirements have been trial produced by means of lab testing.

參考文獻/References:

[1]API RP 5C7.Recommended Practice for Coiled Tubing Operations in Oil and Gas Well Services[S].
[2]NEWMAN K R,BROWN P A.Schlumberger Dowell Development of a Standard Coiledtubing Fatigue Test[C]∥1993 SPE Conference.Houston:SPC,1993.
[3]尹士科.焊接材料實用基礎知識[M].北京:化學工業出版社,2004.

相似文獻/References:

[1]盧雪峰,石凱,周建宏,等.焊縫碾壓形變熱處理及其在連續管中的應用[J].焊管,2009,32(4):35.[doi:1001-3938(2009)04-0035-03]
 LU Xue-feng,SHI Kai,ZHOU Jian-hong,et al.Weld Thermomechanical Treatment with Roller Compaction and It’s Application in Coiled Tubing Manufacture[J].,2009,32(1):35.[doi:1001-3938(2009)04-0035-03]
[2]李霄,石凱,劉彥明,等.連續管焊接工藝及接頭性能研究[J].焊管,2012,35(5):15.[doi:1001-3938(2012)05-0015-04]
 LI Xiao,SHI Kai,LIU Yan-ming,et al.Research on Coiled Tubing Butt Welding Process and Properties of Welded Joint[J].,2012,35(1):15.[doi:1001-3938(2012)05-0015-04]
[3]魯明春,鮑海霞,陳為民,等.連續管水平井作業下入深度計算及應用[J].焊管,2014,37(7):31.[doi:1001-3938(2014)07-0031-04]
 LU Mingchun,BAO Haixia,CHEN Weimin,et al.Running Depth Calculation and Application of Coiled Tubing(CT) Horizontal Well Operation[J].,2014,37(1):31.[doi:1001-3938(2014)07-0031-04]
[4]魯明春.水平井連續管存儲式測井技術在澀北氣田的試驗應用[J].焊管,2014,37(11):27.[doi:1001-3938(2014)11-0027-03]
 LU Mingchun.Test Application of Horizontal Coiled Tubing Store Type Logging Technology in China Sebei Gas Field[J].,2014,37(1):27.[doi:1001-3938(2014)11-0027-03]
[5]付宏強,郜 飛.國內外連續管標準簡介[J].焊管,2015,38(2):68.[doi:1001-3938(2015)02-0068-05]
 FU Hongqiang,GAO Fei.Brief Introduction for Coiled Tubing (CT) Standard at Home and Abroad[J].,2015,38(1):68.[doi:1001-3938(2015)02-0068-05]
[6]汪海濤,等.高強度CT100連續管力學性能研究[J].焊管,2016,39(4):1.[doi:10.19291/j.cnki.1001-3938.2016.04.001]
 WANG Haitao,YU Han,CHANG Yongle,et al.Mechanical Properties Research of High Strength CT100 Coiled Tubing[J].,2016,39(1):1.[doi:10.19291/j.cnki.1001-3938.2016.04.001]
[7]王維亮,等.連續管管-管對接自動焊技術研究[J].焊管,2016,39(12):9.[doi:10.19291/j.cnki.1001-3938.2016.12.003]
 WANG Weiliang,Yu Han,et al.Automatic Welding Technology Research on Coiled Tubing Butt Welding[J].,2016,39(1):9.[doi:10.19291/j.cnki.1001-3938.2016.12.003]
[8]畢宗岳,等.國產超高強度CT110連續管組織與性能[J].焊管,2017,40(3):24.[doi:10.19291/j.cnki.1001-3938.2017.03.006]
 BI Zongyue,XIAN Linyun,et al.Microstructure and Mechanical Properties of Domestic Ultra-high Strength?CT110 Grade Coiled Tubing[J].,2017,40(1):24.[doi:10.19291/j.cnki.1001-3938.2017.03.006]
[9]郭 峰.LG380Q連續管作業橇組的開發[J].焊管,2017,40(4):27.[doi:10.19291/j.cnki.1001-3938.2017.04.006]
 GUO Feng.Development of LG380Q Skid-mounted Coiled Tubing Unit[J].,2017,40(1):27.[doi:10.19291/j.cnki.1001-3938.2017.04.006]
[10]王維亮,余 晗,宋紅兵,等.連續管全位置自動對接焊工藝和接頭性能研究[J].焊管,2017,40(8):19.[doi:10.19291/j.cnki.1001-3938.2017.08.004]
 WANG Weiliang,YU Han,SONG Hongbing,et al.Research on Coiled Tubing All-position Butt Welding Process and Joint Performance[J].,2017,40(1):19.[doi:10.19291/j.cnki.1001-3938.2017.08.004]
[11]畢宗岳,付宏強 編譯.高強度連續管[J].焊管,2007,30(6):85.[doi:1001-3938(2007)06-0085-05]
 Edited and Translated by BI Zong-yue,FU Hong-qiang.High Strength Coiled Tubing[J].,2007,30(1):85.[doi:1001-3938(2007)06-0085-05]

備注/Memo

備注/Memo:
畢宗岳(1962-),男,高級工程師,寶雞石油鋼管有限責任公司研究所所長,在讀碩士研究生,長期從事焊管技術工作,發表論文10多篇。
收稿日期:2007-06-25
更新日期/Last Update:
中国竞彩比分直播网