[1]趙春友.中直徑直縫雙面埋弧焊鋼管[J].焊管,2007,30(5):59-60.[doi:1001-3938(2007)05-0059-02]
 ZHAO Chun-you.Longitudinal Double Submerged Arc Welded Pipe with Medium Diameter[J].,2007,30(5):59-60.[doi:1001-3938(2007)05-0059-02]
點擊復制

中直徑直縫雙面埋弧焊鋼管
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
30
期數:
2007年第5期
頁碼:
59-60
欄目:
應用與開發
出版日期:
2007-09-28

文章信息/Info

Title:
Longitudinal Double Submerged Arc Welded Pipe with Medium Diameter
文章編號:
1001-3938(2007)05-0059-02
作者:
趙春友
(遼陽星德大型鋼管廠)
Author(s):
ZHAO Chun-you
關鍵詞:
直縫埋弧焊管研制COE機組成形方式焊接
Keywords:
longitudinal submerged arc welded piperesearchCOE unitformingweld
分類號:
TG333.93
DOI:
1001-3938(2007)05-0059-02
文獻標志碼:
B
摘要:
闡述了研制開發的中直徑直縫雙面埋弧焊鋼管COE機組的情況,介紹了該機組的工藝設計、裝備配置及COE機組的成形原理和焊接方法,并在產品質量、產品價格優勢、市場前景、經濟效益等方面與其它成形方法進行了對比和分析。
Abstract:
It states status of COE unit of longitudinal double submerged arc welded pipe with medium diameter,and introduce process design , equipment configuration forming principle and welding method of COE unit,and also makes comparison between COE unit and other forming method in product quality,product price,market prospect,economic benefit.

相似文獻/References:

[1]李 東,劉慶才.直縫焊管預焊缺陷對埋弧焊質量的影響及控制[J].焊管,2007,30(4):79.[doi:1001-3938(2007)04-0079-04]
 LI Dong,LIU Qing-cai.Affects and Control to Welding Quality of Tack Welding Defect for LSAW Pipe[J].,2007,30(5):79.[doi:1001-3938(2007)04-0079-04]
[2]馬建軍,黃運明,高建忠,等.大直徑厚壁直縫埋弧焊管質量影響因素及控制方法[J].焊管,2007,30(5):19.[doi:1001-3938(2007)05-0019-04]
 MA Jian-jun,HUANG Yun-ming,GAO Jian-zhong,et al.Influence Factors and Control Methods for the Quality of LSAW Line Pipes with Large Diameter and Big Wall Thickness[J].,2007,30(5):19.[doi:1001-3938(2007)05-0019-04]
[3]宮少濤,王愛民,吉玲康,等.X80與X100級管線鋼屈服強度Rt 0.5與Rp 0.2的差異性研究[J].焊管,2007,30(5):42.[doi:1001-3938(2007)05-0042-03]
 GONG Shao-tao,WANG Ai-min,JI Ling-kang,et al.Study on Difference Between Yield Strength Rt 0.5 and Rp 0.2 for X80 and X100 Pipelines Steel[J].,2007,30(5):42.[doi:1001-3938(2007)05-0042-03]
[4]王亞利.鋼板預彎邊機油缸改型設計[J].焊管,2008,31(1):61.[doi:1001-3938(2008)01-0061-03]
 WANG Ya-li.Modification Design on Hydro Cylinder of Steel Plate Pre-bending Machine[J].,2008,31(5):61.[doi:1001-3938(2008)01-0061-03]
[5]李志華,張 涵,王勝利,等.薄壁直縫埋弧焊管焊縫結晶裂紋分析與控制[J].焊管,2008,31(3):71.[doi:1001-3938(2008)03-0071-02]
 LI Zhi-hua,ZHANG Han,WANG Sheng-li,et al.Analysis and Control of Crystal Crack in LSAW Small Wall-thickness Pipes[J].,2008,31(5):71.[doi:1001-3938(2008)03-0071-02]
[6]郭振其,李志華.熱軋卷板開平板在直縫埋弧焊管中的應用[J].焊管,2008,31(4):51.[doi:1001-3938(2008)04-0051-03]
 GUO Zhen-qi,LI Zhi-hua.Plate from Opening and Leveling HRC Applied in Longitudinal Submerged Arc Welded Pipe[J].,2008,31(5):51.[doi:1001-3938(2008)04-0051-03]
[7]李志華.X80級JCOE直縫埋弧焊管殘余應力估算與分析[J].焊管,2008,31(6):32.[doi:1001-3938(2008)06-0032-03]
 Li Zhi-hua.The Estimate and Analysis of Residual Stress of X80 Grade JCOE LSAW Pipe[J].,2008,31(5):32.[doi:1001-3938(2008)06-0032-03]
[8]張 涵,姚舜鵬,劉克永.基于ANSYS的直縫埋弧焊管焊接過程數值模擬[J].焊管,2008,31(6):35.[doi:1001-3938(2008)06-0035-04]
 ZHANG Han,YAO Shun peng,LIU Ke-yong.Numerical Simulation of Longitudinal Submerged Arc Welded Pipe During Welding Course Basic on ANSYS[J].,2008,31(5):35.[doi:1001-3938(2008)06-0035-04]
[9]王利樹,劉世澤,黃克堅.X80鋼級直縫埋弧焊管的研制[J].焊管,2008,31(6):43.[doi:1001-3938(2008)05-0043-07]
 WANG Li-shu,LIU Shi-ze,HUANG Ke-jian.Research on X80 Grade Longitudinal Submerged Arc Welded Pipe[J].,2008,31(5):43.[doi:1001-3938(2008)05-0043-07]
[10]仝江濤.一種新型鋼管合縫機設計[J].焊管,2008,31(6):65.[doi:1001-3938(2008)05-0065-04]
 TONG Jiang-tao.Design for a New Type Steel Pipe Linking Machine[J].,2008,31(5):65.[doi:1001-3938(2008)05-0065-04]
[11]牛愛軍,畢宗岳,牛 輝,等.X70厚壁海底管線鋼管研制[J].焊管,2013,36(10):26.[doi:1001-3938(2013)10-0026-05]
 NIU Aijun,BI Zongyue,NIU Hui,et al.Research and Development of X70 Steel Pipe withHeavy Wall Thickness Used in Submarine Pipeline[J].,2013,36(5):26.[doi:1001-3938(2013)10-0026-05]

備注/Memo

備注/Memo:
趙春友(1952-),男,高級工程師,遼陽星德大型鋼管廠廠長,長期從事鋼管生產、新產品研發和經營管理工作。
收稿日期:2007-04-18
更新日期/Last Update:
中国竞彩比分直播网